1, Laser cannot be turned on
This situation may be caused by damage to the laser head, contamination of the output window, loose power cord, and other reasons. The solution is as follows:
1. Check if the laser head is damaged or loose, and if so, replace or tighten it in a timely manner.
2. Check if the output lens is dirty and clean it in a timely manner.
3. Check if the laser power cord is securely plugged in and re plug it in.
2, Laser power instability
This situation may be caused by improper adjustment of the optical path, insufficient cooling water, or high water temperature. The solution is as follows:
1. Check if the laser light path is properly adjusted and readjust the light path.
2. Check if the cooling water is sufficient and add cooling water in a timely manner.
3. Check if the temperature of the cooling water is too high. If it is too high, replace the cooling water in a timely manner or check if the cooling system is normal. 3, Poor laser beam quality
This situation may be caused by damage or contamination of the internal optical components of the laser, misalignment of the focusing mirror, and other reasons. The solution is as follows:
1. Check if the focusing mirror is misaligned and readjust the focal length.
2. Check if the optical components inside the laser are damaged or contaminated, and if so, replace or clean them in a timely manner. 4, Excessive laser noise
This situation may be caused by damage or contamination of the internal optical components of the laser, abnormalities in the water cooling system, and other reasons. The solution is as follows:
1. Check if the optical components inside the laser are damaged or contaminated, and if so, replace or clean them in a timely manner.
2. Check whether the water cooling system is operating normally. If there are any abnormalities, replace or repair them in a timely manner.
The above is a summary of common faults and their solutions for laser machines. Before using the laser machine, it should be trained and operated by professional personnel. At the same time, the machine also needs regular maintenance and upkeep to ensure stable working effects and long service life.